Huawei Y9 Prime Flashing Guide with SP Flash Tool

Home » Flashing Guides » Huawei Y9 Prime Flashing Guide with SP Flash Tool

---

If you are trying to flash your Huawei Y9 Prime device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. This is a best application which mainly help you to flash your smartphone.

You can use this tool to flash almost any MTK (Mediatak IC) based and stock ROM, also custom recovery fixing in some extreme cases like firmware update and download, unbrick bricked android device smartphone. Try flashing any custom ROMs, stock ROMs on your Huawei Y9 Prime Android smartphone..

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Huawei Y9 Prime Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Huawei Y9 Prime Android device. Also, do make sure that you have installed Huawei Y9 Prime USB drivers properly on your PC before flashing any firmware file.

• Huawei Honor 10 USB Driver Download Official USB drivers
• Huawei P20 Pro USB Driver Download Official USB drivers
• Huawei P20 lite USB Driver Download Official USB drivers

Find your Huawei Y9 Prime USB drivers by using search below:

You can download SP Flash Tool from our website downloading section. Also you need to download scatter file for your MB based device.

Let me tell you what we can do with SP Flash tool

• 1. We can flash to android stock Rom
• 2. Easliy Flash custom ROM
• 3. Application for fixing bricked or unbrick device
• 4. Easy to read, write parameters
• 5. We can erasing, formatting data and reset your MTC based devices

Pre-requisites before flashing Huawei Y9 Prime:

• Battery should be charged up to 70%
• Make sure you have Huawei Y9 Prime's USB cord available
• Download and install SP Flash tool in PC
• Since, SP flash tool we need to install MediaTek USB drivers
• Download Huawei Y9 Prime firmware file (Scatter file + files to be flashed)
• Last but not the least, you need to take your device backup (for safety reasons)
• Once you have all the things ready above, follow the rest of flashing tutorial

Here are the Requirements For SP Flash Tool

• 1. You have Pc or Laptop
• 2. You need USB data cable for the device
• 3. Drivers download (MediaTek USB-VCOM drivers)
• 4. Download Scatter file and files to be flashed
• 5. Note Backup the device (forum.hovatek.com/thread-468.html)
• 6. SP Flash Tool Download

Steps to flashing Huawei Y9 Prime using SP flash tool

Follow the steps below to flash Huawei Y9 Prime with SP flash tool:

• 
  1
  Download & install spflashtool.exe:

  Download SP flash tool, spflashtool.exe

• 
  2
  Download flash recovery image:

  FLashing is not easy, it take time and patience. To flash Huawei Y9 Prime, make sure you have flash recovery image ready for your device model.

• 
  3
  Load scatter file:

  Click Scatter Loading (Load Scatter file of Huawei Y9 Prime).

• 4
  Uncheck all boxes :

  Now, you should uncheck all boxes from SP flash tool

• 5
  Load Recovery Image:

  Tick-box, Go to / click RECOVERY box from list and load recovery image of your Huawei Y9 Prime device (load image from the separate window -->open)

• 6
  Recovery box must be CHECKED:

  Recovery box is checked before you connect your Huawei Y9 Prime, in recovery image location (uncheck all other boxes)

• 7
  Turn off and connect Huawei Y9 Prime with PC:

  Turn off Huawei Y9 Prime and connect it with PC

• 8
  Click Download button:

  After connecting your device with PC, just click download button on top

• 9
  Step #9, click yes:

  If it ask click “yes”

• 10
  Conguratulations:

  Congrats! You have successfully flashed your Huawei Y9 Prime device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Huawei Y9 Prime have been flashed using SP flash tool.

Notice: WP_Query was called with an argument that is deprecated since version 3.1.0! caller_get_posts is deprecated. Use ignore_sticky_posts instead. in /home/firmwarearena/public_html/flashifyit.com/wp-includes/functions.php on line 4869