Nyx Hit Telcel Flashing Guide with SP Flash Tool

Home » Flashing Guides » Nyx Hit Telcel Flashing Guide with SP Flash Tool
Nyx Hit Telcel
Nyx Hit Telcel Flashing Guide with SP Flash Tool

If you are trying to flash your Nyx Hit Telcel device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Nyx Hit Telcel Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Nyx Hit Telcel Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Nyx Hit Telcel Android device. Also, do make sure that you have installed Nyx Hit Telcel USB drivers properly on your PC before flashing any firmware file.

Find your Nyx Hit Telcel USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Nyx Hit Telcel:

  • Battery should be charged up to 70%
  • Make sure you have Nyx Hit Telcel's USB cord available
  • Download and install SP Flash tool in PC
  • Download and Install Firmware File for your smartphone
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Nyx Hit Telcel firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Nyx Hit Telcel using SP flash tool

Follow the steps below to flash Nyx Hit Telcel with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Nyx Hit Telcel, make sure you have flash recovery image ready for your device model.

  • Nyx Hit Telcel flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Nyx Hit Telcel).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Nyx Hit Telcel device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Nyx Hit Telcel, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Nyx Hit Telcel with PC:

    Turn off Nyx Hit Telcel and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Nyx Hit Telcel device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Nyx Hit Telcel have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *