Videocon V5010 Flashing Guide with SP Flash Tool

If you are trying to flash your Videocon V5010 device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. This is a best application which mainly help you to flash your smartphone.

You can use this tool to flash almost any MTK (Mediatak IC) based and stock ROM, also custom recovery fixing in some extreme cases like firmware update and download, unbrick bricked android device smartphone. Try flashing any custom ROMs, stock ROMs on your Videocon V5010 Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Videocon V5010 Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Videocon V5010 Android device. Also, do make sure that you have installed Videocon V5010 USB drivers properly on your PC before flashing any firmware file.

Find your Videocon V5010 USB drivers by using search below:

You can download SP Flash Tool from our website downloading section. Also you need to download scatter file for your MB based device.

Let me tell you what we can do with SP Flash tool

• 1. We can flash to android stock Rom
• 2. Easliy Flash custom ROM
• 3. Application for fixing bricked or unbrick device
• 4. Easy to read, write parameters
• 5. We can erasing, formatting data and reset your MTC based devices

Pre-requisites before flashing Videocon V5010:

• Battery should be charged up to 70%
• Make sure you have Videocon V5010's USB cord available
• Download and install SP Flash tool in PC
• Since, SP flash tool we need to install MediaTek USB drivers
• Download Videocon V5010 firmware file (Scatter file + files to be flashed)
• Last but not the least, you need to take your device backup (for safety reasons)
• Once you have all the things ready above, follow the rest of flashing tutorial

Here are the Requirements For SP Flash Tool

• 1. You have Pc or Laptop
• 2. You need USB data cable for the device
• 3. Drivers download (MediaTek USB-VCOM drivers)
• 4. Download Scatter file and files to be flashed
• 5. Note Backup the device (forum.hovatek.com/thread-468.html)
• 6. SP Flash Tool Download

Steps to flashing Videocon V5010 using SP flash tool

Follow the steps below to flash Videocon V5010 with SP flash tool:

• 
  1
  Download and install spflashtool.exe:

  Download SP flash tool, spflashtool.exe
• 2
  Download flash recovery image:

  FLashing is not easy, it take time and patience. To flash Videocon V5010, make sure you have flash recovery image ready for your device model.
• 
  3
  Load scatter file:

  Click Scatter Loading (Load Scatter file of Videocon V5010).
• 4
  Uncheck all boxes :

  Now, you should uncheck all boxes from SP flash tool
• 5
  Load Recovery Image:

  Tick-box, Go to / click RECOVERY box from list and load recovery image of your Videocon V5010 device (load image from the separate window -->open)
• 6
  Recovery box must be CHECKED:

  Recovery box is checked before you connect your Videocon V5010, in recovery image location (uncheck all other boxes)
• 7
  Turn off and connect Videocon V5010 with PC:

  Turn off Videocon V5010 and connect it with PC
• 8
  Click Download button:

  After connecting your device with PC, just click download button on top
• 9
  Step #9, click yes:

  If it ask click “yes”
• 10
  Conguratulations:

  Congrats! You have successfully flashed your Videocon V5010 device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Videocon V5010 have been flashed using SP flash tool.

You can visit this page on Bing Bing Search Result And on Yahoo Yahoo Search Result