Yezz Andy 3.5EH Flashing Tutorial with SP Flash Tool

Home » Flashing Guides » Yezz Andy 3.5EH Flashing Tutorial with SP Flash Tool
Yezz Andy 3.5EH Flashing Tutorial with SP Flash Tool

If you are trying to flash your Yezz Andy 3.5EH device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Yezz Andy 3.5EH Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Yezz Andy 3.5EH Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Yezz Andy 3.5EH Android device. Also, do make sure that you have installed Yezz Andy 3.5EH USB drivers properly on your PC before flashing any firmware file.

Find your Yezz Andy 3.5EH USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Yezz Andy 3.5EH:

  • Battery should be charged up to 70%
  • Make sure you have Yezz Andy 3.5EH's USB cord available
  • Download and install SP Flash tool in PC
  • Download and Install Firmware File for your smartphone
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Yezz Andy 3.5EH firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Yezz Andy 3.5EH using SP flash tool

Follow the steps below to flash Yezz Andy 3.5EH with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Yezz Andy 3.5EH, make sure you have flash recovery image ready for your device model.

  • Yezz Andy 3.5EH flashing tutorial with SP Flash Tool - Step 3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Yezz Andy 3.5EH).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Yezz Andy 3.5EH device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Yezz Andy 3.5EH, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Yezz Andy 3.5EH with PC:

    Turn off Yezz Andy 3.5EH and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10

    Congrats! You have successfully flashed your Yezz Andy 3.5EH device

Disclaimer: Please follow the flashing tutorials on your own risk.


If SP flash tool prompts green circle, you are done. Yezz Andy 3.5EH have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *