Tecno Spark 5 Pro Flashing Guide with SP Flash Tool

Home » Tecno » Tecno Spark 5 Pro Flashing Guide with SP Flash Tool
Tecno Spark 5 Pro
Tecno Spark 5 Pro Flashing Guide with SP Flash Tool

If you are trying to flash your Tecno Spark 5 Pro device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. You can use this tool to flash almost any MTK (Mediatak IC) based smartphone. Try flashing any custom ROMs, stock ROMs on your Tecno Spark 5 Pro Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Tecno Spark 5 Pro Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Tecno Spark 5 Pro Android device. Also, do make sure that you have installed Tecno Spark 5 Pro USB drivers properly on your PC before flashing any firmware file.

Find your Tecno Spark 5 Pro USB drivers by using search below:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Pre-requisites before flashing Tecno Spark 5 Pro:

  • Battery should be charged up to 70%
  • Make sure you have Tecno Spark 5 Pro's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Tecno Spark 5 Pro firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Steps to flashing Tecno Spark 5 Pro using SP flash tool

Follow the steps below to flash Tecno Spark 5 Pro with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download & install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • Download flash recovery image Step 2
    2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Tecno Spark 5 Pro, make sure you have flash recovery image ready for your device model.

  • Tecno Spark 5 Pro flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Tecno Spark 5 Pro).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Tecno Spark 5 Pro device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Tecno Spark 5 Pro, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Tecno Spark 5 Pro with PC:

    Turn off Tecno Spark 5 Pro and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Tecno Spark 5 Pro device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Tecno Spark 5 Pro have been flashed using SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *