Datawind 3G7X Flashing Guide with SP Flash Tool

If you are trying to flash your Datawind 3G7X device then I would like to suggest you to try using Smartphone flash tool (aka SP Flash Tool). SP flash tool is great flashing tool for Android. This is a best application which mainly help you to flash your smartphone.

You can use this tool to flash almost any MTK (Mediatak IC) based and stock ROM, also custom recovery fixing in some extreme cases like firmware update and download, unbrick bricked android device smartphone. Try flashing any custom ROMs, stock ROMs on your Datawind 3G7X Android smartphone.

SP flash tool is best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Datawind 3G7X Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Datawind 3G7X Android device. Also, do make sure that you have installed Datawind 3G7X USB drivers properly on your PC before flashing any firmware file.

Find your Datawind 3G7X USB drivers by using search below:

You can download SP Flash Tool from our website downloading section. Also you need to download scatter file for your MB based device.

Let me tell you what we can do with SP Flash tool

  • 1. We can flash to android stock Rom
  • 2. Easliy Flash custom ROM
  • 3. Application for fixing bricked or unbrick device
  • 4. Easy to read, write parameters
  • 5. We can erasing, formatting data and reset your MTC based devices

Pre-requisites before flashing Datawind 3G7X:

  • Battery should be charged up to 70%
  • Make sure you have Datawind 3G7X's USB cord available
  • Download and install SP Flash tool in PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Datawind 3G7X firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of flashing tutorial

Here are the Requirements For SP Flash Tool

  • 1. You have Pc or Laptop
  • 2. You need USB data cable for the device
  • 3. Drivers download (MediaTek USB-VCOM drivers)
  • 4. Download Scatter file and files to be flashed
  • 5. Note Backup the device (forum.hovatek.com/thread-468.html)
  • 6. SP Flash Tool Download

Steps to flashing Datawind 3G7X using SP flash tool

Follow the steps below to flash Datawind 3G7X with SP flash tool:

  • Install SP FLASH TOOL in PC - Step 1
    1
    Download and install spflashtool.exe:

    Download SP flash tool, spflashtool.exe

  • 2
    Download flash recovery image:

    FLashing is not easy, it take time and patience. To flash Datawind 3G7X, make sure you have flash recovery image ready for your device model.

  • Datawind 3G7X flashing tutorial with SP Flash Tool - Step 3
    3
    Load scatter file:

    Click Scatter Loading (Load Scatter file of Datawind 3G7X).

  • 4
    Uncheck all boxes :

    Now, you should uncheck all boxes from SP flash tool

  • 5
    Load Recovery Image:

    Tick-box, Go to / click RECOVERY box from list and load recovery image of your Datawind 3G7X device (load image from the separate window -->open)

  • 6
    Recovery box must be CHECKED:

    Recovery box is checked before you connect your Datawind 3G7X, in recovery image location (uncheck all other boxes)

  • 7
    Turn off and connect Datawind 3G7X with PC:

    Turn off Datawind 3G7X and connect it with PC

  • 8
    Click Download button:

    After connecting your device with PC, just click download button on top

  • 9
    Step #9, click yes:

    If it ask click “yes”

  • 10
    Conguratulations:

    Congrats! You have successfully flashed your Datawind 3G7X device

Disclaimer: Please follow the flashing tutorials on your own risk.

Conclusion

If SP flash tool prompts green circle, you are done. Datawind 3G7X have been flashed using SP flash tool.

You can visit this page on Bing Bing Search Result And on Yahoo Yahoo Search Result

Leave a Comment